HS1 Series 6.5kW-8.5kW Hybrid Solar Inverter | 500V High-Voltage MPPT | <10ms UPS Switch | Independent GEN Port
Features
1.Supports up to 500V PV input voltage with high-voltage MPPT technology
2.Maximum PV power is up to twice the inverter’s rated power (double PV architecture)
3.Dual power output design: full-load output and full-speed battery charging at the same time
4.6.5-inch high-definition touchscreen (optional segmented LCD display)
5.Equipped with an independent generator port (GEN port), compatible with smart load control
6.Supports diesel generator input with customizable smart auto start/stop, ideal for off-grid and weak-grid areas
7.Flexible charge and discharge time scheduling (user-defined)
8.Users can freely set charging and discharging periods based on electricity tariffs or local energy strategies for peak shaving and valley filling
9.Dual-level anti-backflow protection design (double protection)
10.Effectively prevents solar power from feeding back into the grid, avoiding grid impact or power disconnection risks, suitable for countries with strict anti-backflow requirements
11.Supports battery-less operation with cross-line output (can operate without batteries)
12.Supports single-phase parallel operation and three-phase system configuration (up to 10 units in parallel)
13.Both AC input and generator input ports support connection to grid-tied solar inverters
| MODEL | HS1065EH48L | HS1-085-EH48L |
| Battery Voltage | 48Vdc | |
| Battery Type | Lead-acid, lithium batteries, gel batteries, etc | |
| Output | ||
| Rated Output Power | 6500VA/6500W | 8500VA/8500W |
| Rated Output Voltage | 220/230Vac | |
| Rated Output Frequency | 50/60Hz (± 5), intelligent adaptive / setting | |
| Output Waveform | Pure sine wave | |
| Max Efficiency(Peak) | 92% | |
| Rated Current | 26.9A | 36.9A |
| Transfer Time | 10ms(Typical value) | |
| PV Input | ||
| Max PV Input Power | 6500W+6500W | 7200W+7200W |
| MPPT Voltage Range | 90~500V | |
| Max Input Voltage | 500Vdc | |
| Max Charging Current | 120A | 160A |
| Number of MPPT / Strings per MPPT | 2/1+1 | |
| Mains/ Generator Input | ||
| Max Charging Current | 60A | 100A |
| AC Input Voltage Range (UPS mode) | 170~280Vac,±2% | |
| Rated Frequency | 50 / 60Hz | |
| Battery Input | ||
| Voltage Range | 40~60Vdc | |
| Max Charging Current | 120A | 160A |
| General Parameters | ||
| Dimension. W*D*H(mm) | 330*133*450 | |
| Installation Method | Wall-mounted | |
| Weight (kg) | 11.2 | 11.6 |
| Communication Mode | Standard: RS485 / CAN, Optional 4G / WIFI | |
| Protection function | Over/Under Voltage Protection、Over/Under Frequency Protection、AC Output Short Circuit Protection、AC Output Overload Protection、High/Low Temp Protection、PV Reverse Connection Alarm | |
| Operating Environment | ||
| Operating Ambient Temperature | -25℃~60℃(>45℃ Derating ) | |
| Storage Ambient Temperature | -20°C~60°C | |
| Humidity | 0%~95% | |
| Altitude | <2000m | |
| Certifications standard | IEC/EN 61000-6-1/3 、IEC/EN 61000-3-11/12、EN 62920 IEC 62109-1、IEC 62109-2、IEC 62321 | |